Arduino-build-in example
AMB21 Supported ARDUINO built-in example table
There are many built-in examples in Arduino. All examples that listed are compatible with Ameba.
Category |
Name |
Comment |
Remarks |
---|---|---|---|
Basics |
AnalogReadSerial |
Connect potentiometer to 3.3V
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
|
ADC pin options A0, A1, A2, A3, A4, A5,
and A6
ADC pin reading voltage range 0 to 3.3V
ADC value can be calibrated by
modifying _offset and _gain
using 2 points calibration method.
analogSet(float gain, float offset)
can be used to update the calibrated offset
and gain values
|
BareMinimum |
|||
Blink |
LED_BUILTIN sets to Pin 8.
|
||
DigitalReadSerial |
Button options, on-board button, PUSH_BTN
|
||
Fade |
For analogWrite(),
use PWM capable pin
|
PWM capable Pin 8, 9, 10, 11, 12, 13, 16, 17, 18,
20, 21, 23, and 24
|
|
ReadAnalogVoltage |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
|
||
Digital |
BlinkWithoutDelay |
LED_BUILTIN sets to Pin 8.
|
|
Button |
|||
Debounce |
|||
DigitalInputPullup |
|||
StateChangeDetection |
|||
toneKeyboard |
ADC pin used, up to 3.3V
and can be calibrated by
using analogSet(float gain, float offset)
For analogRead(), use ADC pin name
(A0 to A6) instead the integer number
For “tone()” and “noTone()”,
use PWM capable pin
|
||
toneMelody |
|||
toneMultiple |
|||
tonePitchFollower |
|||
Analog |
AnalogInOutSerial |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
For analogWrite(),
use PWM capable pin
|
|
AnalogInput |
|||
AnalogWriteMega |
|||
Calibration |
|||
Fading |
|||
Smoothing |
|||
Communication |
ASCIITable |
||
Dimmer |
For analogWrite(),
use PWM capable pin
|
||
Graph |
Connect potentiometer to 3.3V
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
|
||
Midi |
Use Serial1, MIDI jack pin 5
connected to SERIAL1_TX
Use Serial2, MIDI jack pin 5
connected to SERIAL2_TX
|
||
MultiSerial |
|||
PhysicalPixel |
|||
ReadASCIIString |
For analogWrite(),
use PWM capable pin
|
||
SerialCallResponse |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
For analogRead(),
use ADC pin name (A0 to A6)
instead the integer number
|
||
SerialCallResponseASCII |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
|
||
SerialEvent |
|||
SerialPassthrough |
Serial options, Serial,
Serial1 or Serial2
|
||
VirtualColorMixer |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
|
||
Control |
Arrays |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
Pin 7 is NC, replace it with another pin.
For “analogWrite()”, use PWM capable pin.
|
|
ForLoopIteration |
|||
IfStatementConditional |
|||
switchCase |
|||
switchCase2 |
|||
WhileStatementConditional |
|||
Display |
barGraph |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
Pin 7 is NC, replace it with another pin.
|
|
RowColumnScanning |
|||
Strings |
CharacterAnalysis |
||
StringAdditionOperator |
|||
StringAppendOperator |
|||
StringCaseChanges |
|||
StringCharacters |
|||
StringComparisonOperators |
ADC pin used, up to 3.3V
and can be calibrated by using
analogSet(float gain, float offset)
|
||
StringIndexOf |
|||
StringLength |
|||
StringLengthTrim |
|||
StringReplace |
|||
StringStartsWithEndsWith |
|||
StringSubstring |
|||
StringToInt |