BMI270 Calibration NVM

Materials 

AMB82-mini x 1
SparkFun 6oF IMU Breakout - BMI270 x 1

Example 

Introduction 

This example does some basic calibration of the BMI270 and then allows you to write those calibrations to non volatile memory.

Procedure 

Connect the AMB82-mini to I2C_SDA and I2C_SCL of the sensor as shown in the diagram below.

Open the example in “File” -> “Examples” -> “AmebaWire” -> “BMI270” -> “CalibrationNVM”.

Compile and run the example.

Warning

This chip only allows a total of 14 writes. Be mindful of this limit when recalibrating.