BMI270 Low Power

Materials 

AMB82-mini x 1
SparkFun 6oF IMU Breakout - BMI270 x 1

Example 

Introduction 

This example shows how to configure interrupt pins to take measurement.

Procedure 

Connect the AMB82-mini to I2C_SDA and I2C_SCL of the sensor as shown in the diagram below.

Open the example in “File” -> “Examples” -> “AmebaWire” -> “BMI270” -> “LowPower”.

Compile and run the example.

The measurements from the sensor will be printed out with low power consumption.